SGS PLC Control Flat Plate Vulcanizing Press For Vulcanizing Rubber Products
Flat Plate Vulcanizing Press For Vulcanizing Rubber Products is a type of equipment commonly used for vulcanization of rubber products. It is based on a plate structure and uses heating and pressure to crosslink the rubber during the vulcanization process to form a rubber product with the desired properties.
Machine specification of Rubber Vulcanizing Press Machine
| Model | Total Pressure (MN) | Daylight (mm) | Working Layer No. | Piston Stroke (mm) | Main Motor Power (KW) | Overall Diameter (L x W x H) (mm) |
| XLB-350×350×2 | 0.25 | 125 | 2 | 250 | 2.2 | 1200×580×1200 |
| XLB-400×400×2 | 0.50 | 125 | 2 | 250 | 2.2 | 1400×500×1400 |
| XLB-600×600×2 | 1.00 | 125 | 2 | 250 | 2.2 | 1880×820×1680 |
| XLB-750×850×4 | 1.60 | 125 | 4 | 500 | 3 | 1730×930×2460 |
| XLB-900×900×2 | 2.5 | 200 | 2 | 400 | 4 | 2345×960×1385 |
| XLB-1200×1200×1 | 3.15 | 300 | 1 | 300 | 4 | 2800×1300×2300 |
| XLB-1300×2000×1 | 5.60 | 400 | 1 | 400 | 8 | 2000×1860×2500 |
| XLB-1500×1500×1 | 8.00 | 800 | 1 | 800 | 16.5 | 2200×2200×4300 |
| XLB-1500×2500×1 | 15.00 | 400 | 1 | 400 | 11 | 3000×2500×3300 |
| XLB-2000×2000×1 | 20.00 | 400 | 1 | 400 | 11 | 3600×3000×3300 |
Here is some basic information about the Plate Vulcanizing Press:
Structure and working principle: The Vulcanizing Press usually consists of two upper and lower plates, each with a heating device. The rubber product is placed between the two plates and appropriate pressure is applied. Then, by heating the plates, the rubber is heated to the vulcanization temperature so that the rubber undergoes a vulcanization reaction within a certain period of time. The vulcanization reaction causes the rubber to crosslink to form the final rubber product.
Heating method: The heating method of the Vulcanizing Press can be electric heating, steam heating, or hot medium heating. The heating device is usually located inside the plate and heats the rubber to the desired vulcanization temperature by conducting heat.
Pressure control: The Vulcanizing Press can apply constant pressure or adjustable pressure. The role of pressure is to ensure that the rubber maintains a uniform thickness during the vulcanization process and to promote the crosslinking reaction in the rubber.
Temperature control: The Vulcanizing Press is usually equipped with a temperature control system to ensure that the rubber maintains the desired temperature range during the vulcanization process. The temperature control system can monitor and adjust the temperature of the plate to ensure that the rubber can reach the proper vulcanization state.
Vulcanization cycle: The vulcanization cycle depends on the size of the rubber product, the vulcanization temperature, and the requirements of the vulcanization reaction. Different types of rubber products may require different vulcanization cycles, usually between a few minutes and a few hours.
Application range: The Vulcanizing Press are widely used to manufacture various rubber products, such as rubber gaskets, seals, rubber tubes, rubber floors, etc. According to different manufacturing needs, flat plate vulcanizers can have different sizes, heating power and control systems.
Safety equipment: The Vulcanizing Press are usually equipped with safety equipment such as safety guards, emergency stop buttons and temperature sensors to ensure the safety of operators and the normal operation of equipment.
It should be noted that the Vulcanizing Press needs to strictly follow the relevant operating procedures and safety guidelines when operating to ensure the safety of operation and the quality of production. In addition, different rubber products may require specific vulcanization process parameters and vulcanization formulas, which operators should adjust and optimize according to specific needs.
Product Tags:
|
|
PLC Control Automatic Customizable Rubber Vulcanizing Press Machine For Vulcanizing Rubber Products Images
|
